Technical Data Sheets (MARV)
Need assistance with a specification or product equivalent? Contact us at spec@tencate.com
| Geotextiles (PLEASE NOTE: Mullen Burst Strength ASTM D3786 is not recognized by ASTM D-35 on Geosynthetics as an acceptable Geosynthetic test methods. Puncture Strength ASTM D4833 is not recognized by Aashto M288. Both test methods have been replaced with CBR Puncture ASTM D6241. These properties are no longer published on our TDS.) | ||
| TenCate Mirafi® N Series | ||
| TenCate Mirafi® H2Ri | H2Ri | |
| TenCate MiraGreen® | D4 | |
| TenCate Mirafi® S Series | ||
| TenCate Mirafi® HP Series | ||
| TenCate Mirafi® RSi Series | RS380i RS580i | |
| TenCate Mirafi® PET | ||
| TenCate Mirafi® PEC | ||
| TenCate Mirafi® FW | ||
| TenCate Mirafi® X Series | ||
| TenCate Mirafi® MSCAPE | MSCAPE Earthtone | |
| Geogrids | ||
| TenCate Miragrid® XT-Series | ||
| TenCate Mirafi® BXG | ||
| TenCate Miramesh GR | ||
| TenCate Miramesh SG | ||
| Paving | ||
| TenCate Mirafi® MPV | ||
| TenCate Mirafi® MTK | ||
| TruPave® | ||
| TenCate Mirafi® PGM-G | ||
| TenCate Mirafi® Bond Breaker | 1450BB | |
| FF101 | ||
| TenCate Mirafi® G Series | ||
| DFLD (Drainfield Fabric) Typical Values | ||
RSS
Copyright © 2012 Koninklijke Ten Cate nv. All rights reserved. All trademarks mentioned are the property of their respective owners.
'TenCate' and the credo 'materials that make a difference' are trademarks of Koninklijke Ten Cate nv.